Zirconia Oxygen Analyzer RF-400


    The RF-400 zirconia oxygen analyzer was developed for use with N2 reflow equipment based on Toray Engineering's long track record with oxygen analyzers for the electronics industry.
This analyzer is equipped with our unique, compact zirconia sensor to enable stable and highly accurate measurement over the long term, and an oxygen sensor protection mechanism for unprecedented durability. This is an easy to operate, compact oxygen analyzer which is ideal for integration into N2 reflow equipment and other types of equipment.

Main Specifications

Principle of measurement Zirconia concentration cell
Type Portable or panel-mounted
Display system 4-digit digital display (O2 concentration)
Measurement range 0-1 / 10 / 100 / 1000 ppm / 1 / 10 / 100 vol%O2
Repeatability Within ±1 % of full scale (at or above 1 % range)
Within ±2 % of full scale (below 1 % range)
(0-10 ppm range or below, and atm range are not guaranteed)
Sampling system Continuous suction
Sample gas rate 1000-2000 mL/min
Sample gas conditions Pressure: Pressurized at about 0.03 MPa or less
Flow rate: 1000-2000 mL/min
Humidity: Dew point lower than ambient temperature
Other: Must not contain flammable components, halogen, silica, corrosive components or water droplets.
Reference gas Air
Recorder output External output: DC 4-20 mA
Range marker: BCD, 3 contact outputs (Contact capacity: DC 24 V, 0.3 A)
Alarm output Upper/Lower limit alarm
Ambient temperature 0-50 °C
Warmup time Approx. 20 min
Dimensions 210(W) × 134(H) × 300(D) mm
Weight Approx. 6.5 kg
Panel cut dimensions 225(W) × 135(H)
Gas connection INLET (Sample gas inlet): Rc1/4
BYPASS OUT (Bypass outlet): Rc1/4
OUTLET (Sample gas outlet): Rc1/4
Power supply AC 100 V-240 V 50/60 Hz
Max. power consumption Less than 300 W

Related Products